This ended up being quite a chore for a couple of reasons. First of all, while running errands during the day I had forgotten to buy more concrete. So I ended up using a bag that had sat in my garage for a quite a while. This meant that it had hardened a bit, which translates to lots of hard chunks in my bag. This made mixing it by hand quite a chore, and it took a lot longer than it should have. But I pressed on, got the concrete mixed to the right consistency and then poured my two stones.And then I realized I had mixed way too much cement. But I didn't panic, I just decided that I would dye the cement and make a longhorn stone. That would definitely use up all the extra cement. Wrong! I poured the longhorn stone and still had a ton of cement left. Once again, I didn't panic. I simply decided to use this as an opportunity to create a free handed glass stepping stone. So I traced the mold I was going to use, laid out my design and poured the stone. Was the cement all used up as a I had hoped? No. But by then I had had it. I really needed to get to work cutting glass. So I took out a couple of more molds and just poured the cement into them. And this is what I ended up with: one longhorn stone, one large glass mosaic stone, and two small cement only stones.
Finally the cement was all used up! I cleaned up my equipment, and vowed never to mix an entire bag of cement again. Unless of course I am prepared to make 6 stones. Or I black out this whole experience and totally forget what a mistake mixing a whole bag is. With my memory that is a distinct possibility. But hopefully the fact that I am writing about this experience will prevent such a thing. Hopefully!
Now, since I am writing this post long after I actually did this work I can jump forward and show you the results. I guess getting behind does have at least one small benefit. So after spending all of the 5th in Austin, I went into the garage on the morning of the 6th to turn out my stones.
Maybe I should focus and quit rambling about feet.
This was really fun to make. I loved cutting the glass as I designed it. I will definitely do more of these kinds of stones.
As I was working in my crowded, cluttered garage, I was reminded of a very important step in making stepping stones.
LET YOUR STONES CURE BEFORE PUTTING ANY WEIGHT ON THEM.
Why, you ask? This is why:
Stones are tender when they first come out of the molds. Especially ones you haven't reinforced with wire. I was working in a small space where all my new stones were laid out on the ground. I tried to step over the stones, but ended up stepping on one. It immediately cracked. What a waste! But at least it was just one of the extra stones that was only made out of the left over cement. I would have cried if it had been my mosaic one!
So there you have my story of the stones. Coming next is my account of more glass cutting and and mosaics. I would do it now, but my blog isn't the only thing I have neglected. Poor Dakota is way past due for a walk. And she has been actively hinting that she wants one for the past hr. So check back again soon. There should be another update soon.
1 comment:
Ok..I just want you to know that I read that entire post...laughing all the way, but feeling mighty exhausted and the need for a nap! I am amazed that you got all of that done!
Post a Comment